routing 中的BASE QUANTITY的设置 在线等

pheebs

各位好！
SAP R3 中的CA03 按物料与工厂来查看使用的ROUTING，
比如 该物料A 有3个工艺路线 分别对应的BASE QUANTITY 都是1000，work time 是1H，
       物料B 也有3个相同的工艺路线，分别对应的BASE QUANTITY 也是1000，work time 是1H

其余的设置都是一样的。
现在只对物料A 做工时更改（ca02），也就是要更改BASE QUANTITY1000 为200， 但是一旦对物料A 做更改，物料B 的也随即改变了，怎么做才能解决这个问题呢
多谢了

纵横四海

The base quantity in the routing is used to allocate the standard value quantities. The calculated standard values from the orders are then loaded for deriving work centre capacity.

In other words, you do not need to worry about capacity considerations when maintaining base quantity in routings. If the standard value is with unit time, for example, you just need to specify how much time (based on the work centre formula) is needed to produce 'base quantity' units of the product.

The capacity calculation will take this into account while deriving the work centre loading.

karolo

Better provide more info to the issue, are the two materials with the different Part number and routing group?

pheebs

纵横四海 发表于 2011/8/18 22:56
The base quantity in the routing is used to allocate the standard value quantities. The calculated s ...

多谢了         {:soso_e100:}