根据计量标准的要求，需要修改SAP系统后台配置将部分计量单位（kg，m，t）改为小写

纵横四海

一、根据SAP的Note789748修改计量表
  


二、修改配置 spro

配置路径:	SAP NetWeaver>General Settings>检查计量单位
事务代码	CUNI

1、选中“长度”，点击“计量单位”按钮

2、修改“M”的“商业”单位为小写“m”，然后保存



三、根据SAP的Note966461修改MMBE屏幕
Implement the attached correction.
In addition, as of Release SAP_APPL 5.00, use transaction SE51 to carry out the following change for the RMMMBESTN program and screen number 0300:

• Select the 'Element list' subobject and choose 'Change'.
  

• Position the cursor on the element with the name 'IO_MENGEINH' and choose 'Attributes'.
  

• In the 'ConvExit' field, maintain the 'CUNIT' conversion exit and select the 'Upper/lower' indicator (upper or lower case for the entry).
  

Implement the change and activate the screen.



同样修改屏幕1000.




该贴已经同步到 纵横四海的微博

lijiajian

{:soso_e104:}学习