ebs12能不能在xp系统上安装

zhenghf

各位高手，请问ebs r12 能不能在xp系统上安装，急！！

tianpan

Installing Oracle Applications 11i on Windows XP Professional
http://abidmalik.wordpress.com/2008/08/17/installing-oracle-applications-11i-on-windows-xp-professional/

August 17, 2008 by Abid Malik

I know there is ton of stuff out there on the net on this topic, But I want to add this one in the repository. I have done the installation and took the screenshots and wanted to assist others who want to install at their home/work on their laptop/VMWare etc.
Let’s start then
Objective: Need to install Oracle 11i on Windows XP Professional
OS: Windows XP Professional Service Pack 2
System hardware: Intel Pantium Dual @ 1.60GHz
Memorey: 2.99GB (2 or 1GB would also work)
Hard Disk Space: 150GB (100GB would also work)
NIC Card: One (could be wireless or wired does not matter)
Domain: WORKGROUP(computer does not need to be part of domain but we will fake that computer is part of domain by changing hosts file)
Oracle Applications Software: Oracle Applications 11i Release 10.2 Media Pack for windows (32-bit)
Let’s show you what it look like on my end:

Windos XP Professional Service Pack 2

Oracle Application Selection 1

Oracle Applications software Version

Step 1. Download the Oracle Applications and Unzip them

Oracle Applications After Unzipping them

Step 2. Install VC++ 2005 Express Edition
Note: Install it on C:V98 direcotry ( Just download the software and install it under C:V98)

VC++ installed on C:V98

Step 3. Install Perl Version 5.8 or later, I installed 5.10 (Download Active State Perl MSI installer)
Note: Install it on Cerl (This is the default location anyway)

Active State Perl 5.10 installed on C:Perl

Step 4. Install CYGWIN (UNIX utilities to run under Windows)
Note: Install it under C:cygwin

CYGWIN installed under C:cygwin

Step 5. Adding Domain Name by editing C:windowssystem32driversetchosts file
Note: My IP is 192.168.1.2 and name of computer is Nimra and I just chosen MyDomain as domain

HOSTS file entry for domain name

Step 6. Start the Applications installation process
Note: rapidwiz is in StartCDDisk1 apidwiz directory – just double click rapidwiz
To make the installation easier and smooth, I have chosen “Express Installation”, if you have followed the above instructions, you should fill “Express configuration information” as follow

Express Configuration information

Step 7. Pre-requisites checkup
Note: If everything goes smooth, you will see the following screen

Pre Check

Step 8. completing installation
Note: After couple of hours (actually it took 6 hours on my Western Digital 300GB USB External drive) the following screen should welcome you

Installation successfull confirmation

Step 9. Login to Oracle Applications to make sure it was installed successfully
Note: The default user name and password is sysadmin/sysadmin
login information: http://computername.domain:8000
user name: SYSADMIN
Password: SYSADMIN

Login to E-Business Suite

This is the just th overall procedure in order to install Oracle Applications on Windows. I will be adding more posts about cofiguration/management, system administrion, Application DBA.

tianpan

Installing Oracle Applications E-Business Suite R12 (12.1.1) on Windows XP / Windows 2003 Server

                                                                                        source:http://oraclelabs.com/index.php/2011/05/19/installing-oracle-applications-e-business-suite-r12-on-windows-xp-windows-2003-server/

Posted on May 19, 2011 by Admin                                       
                                                                                        Minimum Hardware Requirements:
1. Windows XP (professional or Home) Service Pack 2 / Windows 2003 Server with 2 GB RAM and make sure you have NTFS file system.
2. Hard Disk  250 GB where 233 GB space is required for vision installation (excluding media pack; which needs around 37 GB space). You can use external hard drive too. Don’t listen to those who advise you to install EBS R12 without vision database. I know you are installing all this for learning etc.
////////////////////////////////////////////////////////////////////////////
Very Important Note:
1. Make sure there is no oracle product installed on your system. No entry of oracle should be in windows registry except system default by windows itself. So it is recommended to use fresh system for this purpose. If you tried a failed installation before on your PC then reinstall the Operating System again otherwise you will waste your time.
2. There should be !!!!NO!!! JDK installed on your machine. EBS will install JDK version on your machine otherwise you will get errors I don’t want to discuss all this here. Just NO JDK on your machine.
////////////////////////////////////////////////////////////////////////////
Pre-requisites; Utilities:
1. Microsoft VC++
   • Make sure that it must be VC 8 or above because VC 6 was valid up to 11i. If you do it with VC 6 then utilities check will not give error but you will stuck at 13% or 66% installation.
   • While installing VC++ make sure it is done in C:\MSVS\VC. No spaces in any directory structure of any software you install as pre-requisite for Oracle Apps.
   • Copy cl.exe from C:\MSVS\VC\bin to C:\WINDOWS\System32
2. Perl – http://www.activestate.com/Products/ActivePerl/
   • Version 5.8 or more and use MSI package type.
   • Perl is only needed if you are using Oracle Media Pack. If you are downloading from oracle site then you can skip this installation.
3. CYGWIN – http://cygwin.com/
   • Download setup.exe to your machine.
   • Run setup.exe and click Next, which will bring up the Choose Installation Type screen.
   • Select ; Install from Internet and Click Next
   • Select ; Root Directory C:\cygwin and select radio button
   • Install for ; All Users and Default Text File Type ; DOS / text ; Next Local Package Directory can be any but C:\cygwin is recommended. ; Next Direct Connection.
   • Click on Next again to get to the Select Packages screen, and select the following packages (click on to toggle):
     a.        All Default
     b.        Archive Default, plus manually select the zip package
     c.        Base Default, plus manually select the following extra packages: ash, coreutils, diffutils, findutils, gawk, grep, sed, tar and which
     d.        Devel Default, plus manually select binutils, gcc, gcc-core, gcc-g++, make and mktemp
     e.        Doc Default, plus manually select cygwin-doc and man
     f.        Editors Default, plus manually select vim
     g.        Interpreters Default, plus manually select gawk
     h.        Shells Default, plus manually select ash and tcsh
     i.        Utils Default, plus manually select cygutils and file
   • Click on Next again to download the selected files. It will take some time depending      upon mirror site you selected and after download cygwin setup will be automatically      starts.
   • After installation completed, Open folder C:\cygwin\bin and rename followings:
   • gawk.exe to awk.exe
   • grep.exe to egrep.exe
   • make.exe to gnumake.exe
   • gcc.exe to cc.exe
   • You can override the name if system says that awk or egrep or cc already exits just remove or move to some other place.
4. Set the Path to include the C:\cygwin\bin
   • C:\> set PATH = %PATH%;c:\cygwin\bin
   • And then check your PATH to see that it include C:\cygwin\bin
   • C:\> echo %PATH%
////////////////////////////////////////////////////////////////////////////
Oracle Media:
You should be having Lasted available Oracle media pack (recommended) or Software download from oracle site and follow the unzipping instruction as per oracle documentation. I have downloaded it from: https://edelivery.oracle.com/
////////////////////////////////////////////////////////////////////////////
Domain Name Configuration:
1. Open file c:\windows\system32\drivers\etc\hosts. Enter a domain next to localhost entry you will be using this domain while installing Oracle Applications. I used mydomain so you can replace what ever you want. 198.168.10.102 is IP Address of my PC you should enter your machine’s IP. If you don’t know it you can find it.
C:\>ipconfig
Example
127.0.0.1 localhost
198.168.10.102 SystemName.mydomain.com
2. Go to Control Panel > Systems > Computer Name Tab > Click on Change > Click on More > Enter Primary DNS Suffix as ‘mydomain’.
3. Open Network connections, Select your Connection on which your machine is connected (You will find Wireless or LAN) and right click and select properties. Select Internet Protocol (TCP/IP) and click on to properties. Click on Advanced button and go to DNS tab. Enter DNS suffix for this connection as ‘mydomain’.
4. Restart the PC.
////////////////////////////////////////////////////////////////////////////
Staging the Oracle:
If you have Oracle Media Pack then:
Insert the Start Here DVD in DVD Rom and go to folder:
StageR12\startCD\Disk1\rapidwiz in DOS Prompt and type:
D:\StageR12\startCD\Disk1\rapidwiz\adautostg.pl
And follow the wizard.
Finally you must have these five folders in StageR12 Directory:
1. oraAppDB
2. oraApps
3. oraAS
4. oraDB
5. startCD
Note: If you have downloaded the media from oracle site, then you just need to put the downloaded and extracted folders in the proper directories… No need to do staging.
////////////////////////////////////////////////////////////////////////////
Recommended (Not necessary):
There steps are only if your installation fails due to any reason so you can restore your registry and system to pre-installation state:
1. When Staging is done successfully then export the registry and save it on a file.
Start > Run > regedit > File > Export and select the location where you want to store it .
2. Take a Computer Restore Point.
Start > All Programs > Accessories > System Tools > System Restore > Create a Restore Point > Enter name of restore point for example ‘PreOra’ and Press the Create.
3. Restart the PC.
////////////////////////////////////////////////////////////////////////////
Installing the the EBS R12
So far you have done a great job. Now time to get the job done.
1. Go to folder E:\StageR12\startCD\Disk1\rapidwiz or where you have done your staging on hard drive or external hard drive and just click RapidWiz
2. On welcome screen > Next and Select Install Oracle Applications E-Bussiness R12 Check on Use Express Installation > Next
3. In Express Configuration Information screen change the following (Leave all to default):
  a. MKS directory = C:\cygwin\bin or where “cygwin\bin” is
  b. MSDEV directory = C:\MSVS\VC\bin or where VC++ was installed
  c. Oracle Base directory =E:\oracle or where ever you want to install oracle applications
4. Follow the wizard and you should pass all the Pre-Install Checks. If not then you did not follow instructions above and help yourself.
5. If you passed all the checks then just Click Next and follow the Wizard and installation will be done in 5 steps and take about 2-3 hrs depends upon the system.
6. After the installation is completed successfully (it should be) then Post-Installation Checks will be preformed. If you passed all the checks It is really a Wonderful and You Rocks
7. If your system don’t pass the Post-Installation Checks even then don’t worry just smile coz installation is successful you need to restart your PC and Open Command Prompt open to staging directory: d:\StageR12\startCD\Disk1\rapidwiz
And now just type rapidwiz –restart
8. Follow the Wizard and Enter all the info as you enter before Now This time it will take few minutes and you should pass Post-Installation Checks
9. If still a problem just repeat above step again you will get to it . Restart the PC and enter the URL in web browser
http://hostname.mydomain.com:8000/
10. E-Bussiness Login Username = operations Password = welcome
////////////////////////////////////////////////////////////////////////////

tianpan

Install Oracle Apps R12/12i on Windows
This post covers list of software required to install Oracle Applications R12/12i (E-Business Suite), including link to download required software (vc++, make, gnu, cygwin, Windows Server and Apps R12/12i).
Steps by steps installation of Oracle Apps R12/12i on windows coming soon

Operating System and required Utility
1. Windows Server 2003 (all edition) is ONLY supported version for installing Oracle Apps (E-Business Suite) R12/12i on windows. Download windows server 2003  trial version from here

You need to image files X13-05665.img & X13-05463.img  (After download change extension from .img to .iso and burn them as boot-able CD)
Note use boot-able option while burning CD.
2.Install windows server 2003 on bare machine (no operating system) or install it on existing operating system (windows, Unix, Linux) using vmwware as Guest Operating system.
Steps on how to install VMware on Linux click here http://onlineappsdba.com/index.php/2008/05/26/install-vmware-on-linux-windows-server-2000-as-virtual-machine/
Steps on how to install VMware on windows click here
http://onlineappsdba.com/index.php/2007/03/03/installing-vmware-linux-for-oracle-apps-r12-preparation/
You can install windows server 2003as VMware “guest operating system” on “Windows XP” or “Windows Vista” Host Operating system.
3. You need to download & install Visual C++ 2005 (VC ++ 8.0) which is part of Microsoft Visual Studio 2005 (Professional or Standard Edition).
Download VC++ 2005 From Here
.
4. You need either MKS Toolkit (9.1 and higher) or Cygwin

Download MKS Toolkit from here http://www.mkssoftware.com/support/patches.asp
Download Cygwin http://www.cygwin.com/setup.exe
We will use cygwin for demo R12/12i installation on windows server 2003
5. If you are using MKS toolkit, you also need GNU Make 3.81 or higher (patch 5897842from metalink)
.
Apps R12/12i Software
Next step is to download or order (Yes you can order Oracle Apps 11i/R12/12i software for 60$ or 30£ online) Apps R12 (12.0.4) software
6. Download Oracle Apps R12/12i (12.0.4 version) for windows from http://edelivery.oracle.com -> Continue -> (Enter Details) -> Continue -> select E-Business Suite & platform Microsoft Windows 32 Bit

From next screen select as shown in screenshot (Select NLS if you wish to install language other than American US)

Finally download files till part number V11832-01

Download files listed above Documentation
(You should register first in edelivery to download R12 software, )
or
6. Order R12/12i Disk from http://oraclestore.oracle.com
Select Site -> Click on Tab “Media Packs” on top ->

Select your Operating system (Microsoft Windows) -> select “Oracle E-Business Suite Applications Release 12.0.4 Media Pack for Microsoft Windows (32-bit)”

  This will cost 60 $ (For UK customers its 30.47 £) -> Click on “Add to cart” and Click on “Checkout”  (You should create account on oraclestore first, if you don’t have one)
  
.
Things good to know
1. Do not install apps under any directory with spaces in it like “Program Files”
2. There is no need to install JDK on windows machine (It comes as part of R12)
3. Installation R12 on windows is not supported using network disk (always use local disk)
4.Donot use compressed disk (windows) to install Apps R12/12i
5. For R12/12i VISION you need approx. 161 GB (133GB +28GB) and for Fresh Install 73 GB (45GB + 28GB) disk space.
6. You can install R12/12i with 2GB memory but its good to have 4GB memory
.
References
402311.1 Oracle Applications Installation and Upgrade Notes Release 12 (12.0.4) for Microsoft Windows
414992.1  Using Cygwin to Maintain Oracle E-Business Suite Release 12 on Windows
418109.1  Rapidwiz R12 Failed at 66% with error: RW-50004: Error code received when running external process.
472852.1  R12 gnumake.exe error During relink: Error: 4332 Abort gnumake
453417.1 Rapidwiz system utilities check fails on R12 installation
394692.1  Oracle Applications Documentation Resources, Release 12
R12/12i Installation Document from Oracle
Step by Step Installation of Oracle Apps R12/12i on windows coming soon..
  Next in series
Related Posts for R12 on Windows

• Install Oracle Apps R12/12i on Windows
• Install R12 (12.0.4) on Windows : Create User >> Install Cygwin
• Install Oracle Apps R12 (12.0.4) on Windows >> Install VC++ & R12
  

tianpan

Google > Google > Google........

zhenghf

tianpan 发表于 2012/12/11 13:00
Install Oracle Apps R12/12i on Windows
This post covers list of software required to install Oracle ...

太强了，那就是可以在xp上安装了？